3.
3.1
Opens the saved sensor configuration settings from an archive file on the PC.
Load Settings:
Saves the displayed configuration settings in an archive file on the PC.
Save Settings:
Selects the USB interface used on your PC.
Select COM Port:
If the "Remember next time" box is checked, the selected interface will always be used in
future.The number of the USB Port can be found under:
Start -> Settings -> Control Panel -> System -> Hardware -> Device Manager
Exit:
Closes the configuration software.
3.2
Provides general information on the configuration software.
4.
4.1
The "Start" tab is used to initiate communication
with the connected sensor.
This function downloads the current sensor configuration and serial number.
Read:
The configuration changes made on the other tabs can be uploaded to the
Write:
sensor using the "Write" command.
Note: Execute the "Read" function before making any new configuration change!
Menu Items
File
Help
EE75 Configurator
Start
16
Configurations Software