Invacare MK6i Reference Manual page 84

User Settings/Diagnostics
ERROR CODE
E103 GB FAULT - CYCLE PWR
E104-E105 GB CTRL FAULT
E106-E107 GB CTRL FAULT
E108-E109 CURR CAL FAULT
E110-E111 GB CTRL FAULT
E112-E113 GB CTRL FAULT
E114-E127 CURR CAL FAULT
E128 M2 MOTOR FAULT
E129 M1 MOTOR FAULT
E130, E132 M2 MTR CAL
E131, E133 M1 MTR CAL
E134-E139 SW FAULT
Invacare® MK6i™Electronics
SYMPTOM
Possible Controller Failure
Left Current Sensor Error
Right Current Sensor Error
Current Calibration Error
Left (on CWD)/Right (on RWD)
Current Sensor Error
Right (on RWD)/Left (on CWD)
Current Sensor error
Current Calibration Error
Left Motor (M2) (on RWD)/Right
(on CWD) Over Current Fault
Right Motor (M1) (on RWD)/Left
(on CWD) Over Current Fault
Left Motor (RWD)/Right Motor
(CWD) - Too much drag/load
Right Motor (RWD)/Left Motor
(CWD) - Too much drag/load
Controller Software Fault
PROBABLE CAUSE
84
SOLUTIONS
Turn chair off and then back on.
If fault repeats, replace controller and
recalibrate motors.
Replace controller and recalibrate motors.
Replace controller and recalibrate motors.
No action required - Factory Test Only
Call Technical Services.
Replace controller and recalibrate motors.
Call Technical Services
Replace controller and recalibrate motors.
No action required - Factory Test Only
Check Left Motor (M2) (on RWD)/Right
(on CWD) and Cabling.
Check Right Motor (M1) (on RWD)/Left
(on CWD) and Cabling.
Recalibrate motor.
Recalibrate motor.
Replace the controller.
Call Technical Service.
Part No 1141471