Using The Basic Memory Card; To Use The Basic Memory Card - Invacare MK6i Reference Manual

Using the Memory Card

13.4 Using the Basic Memory Card


For this procedure, refer to
The basic memory card is recommended for storing a backup copy of
final programming settings. This card can be attached to the wheelchair
or left with the user. If the display or driver control need exchanging, the
memory card serves to restore the original settings. Additional backup
copies of the program values can be saved to the professional memory
card. For the basic memory card to restore final program settings, the
file name (system name) on the card MUST match the system name of
the MK6i Display or the MK6i Joystick. To change the system name of
the display or the joystick, Refer to System name on page 64.

To use the basic memory card:

1. Insert the basic memory card into the card slot of the MK6i display
or driver control.
2. Turn the wheelchair On.
3. Use the joystick (forward/reverse) or display (up/down arrows) to
select:
• STORE TO CARD - Create a back up file.
• READ FROM CARD - Restore programming settings.
4. Press one of the following to begin storing or reading:
• Display - Press the Select key.
• CMPJ+, PSR or PSF joysticks and Mini-Display- Press the mode
button.
• nXc Joystick - Push the On/Off/Mode switch up.
Invacare® MK6i™Electronics
FIGURE 13.1.
Display
Card Slot
Display
SELECT
Key
CMPJ+ Joystick
Card
Slot
Mode
Button
Joystick
FIGURE 13.1 Using the Basic Memory Card
52
Mini-Display
Card Slot
Display
Mode
Button
nXc Joystick
Card Slot
On/Off/
Mode
Switch
Joystick
Part No 1141471