Invacare MK6i Reference Manual page 35

LCD DISPLAY
STBY SEL
> ON
OFF
STANDBY TIME
60 S
LESS
||||||||
STANDBY IN ECU
> ON
OFF
RIM CONTROL
> ON
OFF
Part No 1141471
Sends the wheelchair into resting mode. Driver commands then SELECT next operating function –
BYPASSING the "Reset Switch". Once in Standby mode:
• FORWARD command ALWAYS returns the wheelchair back to Drive Mode.
• RIGHT Command = Remote Drive Select Mode (if turned on). Subsequent Left command changes to next drive.
• LEFT Command = ECU functions, then Powered Seating Functions (if turned on).
• Disappears from the menu if Sleep Mode is On.
Sets the time before for a Wheelchair will enter into "STAND BY" (resting) Mode
• Range is from 2 seconds to 120 seconds.
MORE
• Present only when "Sleep Mode" or "Standby Select" is activated.
• ON allows "Normal" Stand-By Function.
• OFF eliminates Stand-By in ECU modes, but REQUIRES a Mode switch to exit ECU mode (Helpful during mouse
emulation or Aux. Comm. operation through the driver control when Sleep Mode or Standby Select is also needed
elsewhere, but they interfere).
• Present only if Sleep Mode or Standby Select is On.
Allows three commands (quadrants) to drive 4 directions.
• Pressing a Mode switch (reset) changes the forward command to reverse driving.
• Pressing the switch again toggles the command back to forward driving.
• To eliminate the need for the mode switch:
• Turn ON Standby Select
• To activate "Reversing" without mode switch:
• Allow the chair to enter Standby Mode
• A left command activates Reversing
• A forward command returns to normal driving.
PERFORMANCE ADJUSTMENT DESCRIPTION
35
MK6i Performance Adjustments
Invacare® MK6i™Electronics