Invacare MK6i Reference Manual page 36

Remote programmer
Hide thumbs Also See for MK6i:
Table of Contents

Advertisement

MK6i Performance Adjustments
LCD DISPLAY
DRIVE SELECT
> ON
OFF
ECU 1 (2, 3, OR 4)
> OFF
MOM MOTOR
LATCHED
COMM
ASM 1 (2)
> OFF
MOM MOTOR
LATCHED
COMM
MOUSE
> OFF
3 QUADRANT
4 QUADRANT
MOUSE SETTINGS>>>
Invacare® MK6i™Electronics
PERFORMANCE ADJUSTMENT DESCRIPTION
Drive Select: Allows Left Driver Command to change drives (1, 2, 3, 4)
• MUST be turned on in all drives to be accessed through the Driver Command.
• Uses a Reset switch (or Standby Select) to enter & exit Remote Select (Drive Select) mode.
• A LEFT driver command will advance to the next drive number activated.
• Standby Select bypasses reset switch requirement to enter mode.
• Right command activates Drive Select.
• Left command advances drives.
• After allowing the wheelchair to re-enter Standby Select Mode, Forward command returns to driving.
Sets performance settings for devices connected to an ECU Port. Each output (1, 2, 3, or 4) appears
separately in the menu. (Requires COM12, or COM 34).
• OFF Disables that output. (Recommended if no device is connected to it.).
• MOM.MOTOR allows each driver command to operate in the momentary mode.
• LATCHED places the driver commands in the latched mode, requiring an opposite direction command to turn off.
(Suggested for pneumatic operation of Tilt / Recline when operating through a COM unit).
• COMM allows immediate response of the relays – used with computers or communication devices. Also allows
two relays to be closed at once (i.e., Forward & Right) for diagonal (veer) capability.
Auxiliary Seating Module: MOTION CONCEPTS HELIX BOX ONLY Replaces ECU12 / ECU34 when
operating MC Seating through Driver Control.
• OFF Disables that output (Recommended if no device is connected to it.).
• MOM.MOTOR allows each driver command to operate in the momentary mode.
• LATCHED places the driver commands in the latched mode.
Activates Wireless Mouse Emulation through the Driver Control.
• OFF Disables mouse control for that drive.
• 3 Quadrant: Forward toggles Mouse up / down.
Right toggles Mouse left / right.
Left = Mouse Click, Double Click, Latch.
• 4 Quadrant: Up – Down – Left – Right Mouse Control.
NOTE: Proportional Mouse Speeds controlled through PC Control Panel Digital Mouse Speeds programmed in Calibrations
Menu.
Refer to MK6i IR Control/Mouse Emulation owners's Operator and Programming Manual, part number
1160891.
36
Part No 1141471

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents