Invacare MK6i Reference Manual page 76

Calibration Menu
CALIBRATION
PRS TIME
ERASE ALL
IR SETTINGS>>>
NOTE: Not available on nXc joystick.
Invacare® MK6i™Electronics
LCD DISPLAY
PRS TIME
30 M
LESS
||||||||
ERASE ALL
Refer to MK6i IR Control/Mouse Emulation owners's Operator and Programming Manual, part number 1160891.
Pressure Relief Signal
• Can be set from 0 to 60 minutes.
MORE
• Requires a Mode Switch.
• The PRS TIME menu sets a time for an audible warning (on Display only) that
it is time to change positions. The Display will show PRESS RESET and the
wheelchair will not operate until Reset is pressed.
ERASE ALL allows the CMPJ+/Display settings to be set to the factory
default standard programs. There is a confirmation screen that appears
and a reminder to SET THE DRIVE CONFIGURATION (in the
Calibration Menu) after the Erase All completes. If drive configuration is
not set, the display will indicate "Please Set Drive Configuration". To
correct this condition, choose and save the appropriate Drive Configu-
ration in the Calibrations menu.
76
DESCRIPTION
Part No 1141471