Invacare MK6i Reference Manual page 33

LCD DISPLAY
INPUT TYPE
MPJ MK6I MPJ+, PSR+,
PSF+
COMP COMPACT JOYSTICK
MEC MICRO EXTREMITY /
MINI PROP
PEACHTREE
ANALOG PROPORTIONAL
1500 INVACARE RIM
CONTROL
SNP SIP-N-PUFF
DIGITAL NON-PROPORTIONAL
ASL DIG ASL SYSTEMS ONLY
COLOR THEME
MOM/LATCH
> MOM
LTCH
Part No 1141471
PERFORMANCE ADJUSTMENT DESCRIPTION
Used to Add / Change Assigned driver control in one or more drives.
• Choose desired driver control for each drive according to this list.
• Only available when more than one Driver control is connected.
• Only driver controls connected will be displayed.
• Only systems with 4 drive modes may add additional driver controls.
• Two driver controls of the same Input Type cannot be used on one chair.
• To increase the combinations of driver controls allowed, the following changes were made from MK5 to MK6i:
• MK5 SWITCH JOY has been divided into MK6i Digital - ASL Digital
• MK5 1812 has been divided into MK6i Analog - MEC - Peachtree
• ASL Mushroom and Magitek Controls use ANALOG.
Sets the background color.
• Available with Color MPJ+ Joystick only.
• Color Choices: BLUE, SILVER, WHITE, SALMON, PINK, BUCI.
Determines the mode for FORWARD driving commands.
• Momentary commands are only active while the command is being given.
• Latched commands remain active after release of the driver control - until 2 reverse commands or emergency stop
switch is activated.
• Left & Right commands are ALWAYS momentary. (See "MOM/REVERSE").
• Available on proportional & digital controls on 4 drive systems.
• Latched driving requires mode switch / emergency stop switch.
33
MK6i Performance Adjustments
Invacare® MK6i™Electronics