Invacare MK6i Reference Manual page 65

CALIBRATION
ACC FUNCTION
(ON ALL WHEELCHAIRS
EXCEPT FDX)
TTJC ACTUATOR
NOTE: Not available on nXc joystick.
Part No 1141471
LCD DISPLAY
>>OFF
TILT
RECLINE
ELEVATE
LEG
NOTE: FDX With Conventional Actuators ONLY -
TILT actuator is assigned to ACC 1.
NOTE: TDX Spree ONLY - ELEVATE is assigned to
ACC 1. TILT is assigned to ACC 2.
>>TILT
RECLINE
ELEVATE
Sets which actuator operates directly through the controller, not
through an additional actuator module.
• Allows display icons, programming options and drive lockout settings to match
the chair configuration (i.e., tilt only, tilt and recline, etc.)
• Set according to this chart:
ACC SETTINGS
No Actuators
Tilt Only
Tilt - In. Pwr Legs
Tilt - Center Mount Legs
Tilt and Elevate
Tilt, Elevate, Center Mount Legs
Tilt, Elevate, Ind. Pwr Legs
Recline Only, Recline Ind.
Pwr Legs
Recline - Center Mount Leg
Tilt Recline
Tilt Recline CM Leg
Through the Joystick Control.
• Only present with Multiple Actuators and the SANODE.
• Allows choice of operating only one actuator through the joystick if multiple
actuators are in the system.
65
Calibration Menu
DESCRIPTION
CONVENTIONAL
OFF
TILT
TILT
LEG
ELEVATE
LEG
ELEVATE
RECLINE
LEG
OFF
LEG
Invacare® MK6i™Electronics
SMART
OFF
OFF
OFF
OFF
ELEVATE
ELEVATE
ELEVATE
OFF
OFF
OFF
OFF