Invacare MK6i Reference Manual page 69

CALIBRATION
VIEW/SCAN (CONTINUED)
NOTE: Not available on nXc joystick.
INIT TIME
NOTE: Not available on nXc joystick.
REPEAT TIME
NOTE: Not available on nXc joystick.
Part No 1141471
LCD DISPLAY
INIT TIME
LESS
|||||
REPEAT TIME
LESS
|||||
Sequential Scan
• Each icon in the active drive is enlarged and displayed one at a time.
• Any driver command selects the icon, placing the wheelchair in that active
mode.
Used to determine when scanning starts after the chair becomes idle,
.4S
for instance after the chair is not driving or seating feature is stopped.
MORE • After repeating the scan 3 times, the chair will enter a resting mode.
• Any driver command will initiate the scan again.
Used to determine the amount of time the scanning screen will dwell
.10S
on a highlighted item before moving to the next item.
MORE
69
Calibration Menu
DESCRIPTION
Invacare® MK6i™Electronics