Printing On Thick Or Thin Paper; Feed Roller Pressure Lever Position - Ricoh Priport DX 3343 Operating Instructions Manual

Printing on Thick or Thin Paper

When you make prints on thick (127.9
2
to 209.3 g/m , 34.0 to 55.6 lb.), standard
2
(52.3 to 127.9 g/m , 13.9 to 34.0 lb.) or
thin (47.1 to 52.3 g/m
paper, perform the following steps.
Note
❒ Reduce the print speed when print-
ing on thick or thin paper.

Feed Roller Pressure Lever Position

A
Shift the feed roller pressure le-
ver to the Thick, Standard, or
Thin paper position.
Note
❒ Shift the lever according to the
paper weights as shown in the
following table.
Metric
version
Thick 127.9–209.3
2
g/m
Stan- 52.3–127.9
dard 2
g/m
Thin 47.1–52.3
*1 2
g/m
*1
When paper is smaller than B5,
" × 8
1 1
5 / /
2 2
2
81.4 g/m (21.6 lb.), move the
feed roller pressure lever to the
Thin paper position.
2
, 12.5 to 13.9 lb.)
ANT075S
Inch version
34.0–55.6 lb.
13.9–34.0 lb.
12.5–13.9 lb.
" and heavier than
Printing on Thick or Thin Paper
B
Shift the paper feed side plates
lock lever forward. Adjust the side
plates to match the paper size.
1: Paper Feed Side Plates Lock Lever
C
Make sure that the paper feed side
plates touch the paper lightly.
2
1
ANT072S
ZCTH150E
33