Printing On Thick Or Thin Paper; Pressure Lever Position - Ricoh Priport DX 4545 Operating Instructions Manual

Printing on Thick or Thin Paper

Perform the following steps when
you make prints on thick (127.9 to
2
209.3g/m , 34.0 to 55.6 lb), standard
2
(52.3 to 127.9g/m , 13.9 to 34.0 lb) or
thin (47.1 to 52.3g/m
paper.

Pressure Lever Position

A
Shift the feed roller pressure le-
ver to either Thick, Standard, or
Thin paper position.
Note
❒ Choose the correct lever posi-
tion according to the paper
weights as shown in the follow-
ing table.
Metric
Version
Thick 127.9 —
209.3g/m
Standard 52.3 —
127.9g/m
*1 47.1 —
Thin
52.3g/m
*1
When the paper is smaller than
" × 8
1
B5 JIS, 5 /
2
than 81.4g/m
Thin paper position.
2
, 12.5 to 13.9 lb)
ZFRH210E
Inch Ver-
sion
34.0 —
2 55.6 lb
13.9 —
2 34.0 lb
12.5 —
2 13.9 lb
1
/ " and heavier
2
2
(21.6 lb), use the
Printing on Thick or Thin Paper
B
Make sure that paper feed side
plates touch the paper lightly.
C
After you have finished printing,
return the feed roller pressure le-
ver to the Standard paper posi-
tion.
1
ZCTH150E
ZFRH210E
39