Adjusting The Print Image Density; Before Making A Master; After Making A Master - Ricoh PRIPORT JP730 Operating Instructions Manual

Operation

Adjusting the Print Image Density

You can adjust the print image densi-
ty to suit your needs. There are two
1
ways to do this:
❖ ❖ ❖ ❖ Before Making a Master
Adjust the image density using the
{ { { { Image Density} } } } key.
❖ ❖ ❖ ❖ After Making a Master
Adjust the image density using the
{ { { { Speed} } } } key.

Before Making a Master

A A A A
Use the { { { { Image Density} } } } key before
pressing the { { { { Master Making} } } } key.
20

After Making a Master

A A A A
Press the { { { { Speed} } } } key to decrease
the printing speed. Press it again
to bring the printing speed back
to Fast.
Note
❒ The faster the printing speed be-
comes, the lighter the printing
density is. If you want darker
prints, decrease the printing
speed.