Adjusting The Print Image Density - Ricoh DX 4542 Operating Instructions Manual

Adjusting the Print Image Density

You can adjust the print image densi-
ty to suit your needs.
Note
❒ You can specify the image density
that is selected by default when the
power is turned on. See "1 MSTR
Makg.Density" on p.78 "3 Initial
Setting".
A
Press the {Image Density} key.
Note
❒ If your original has a coloured
background such as red or blue,
select a lighter image density to
prevent the prints from appear-
ing dirty.
B
Set your original.
C
Enter the number of prints with
the number keys.
D
Press the {Master Making} key.
Printing starts automatically after
the trial print.
Note
❒ If you wish to check the image
before printing, press the {Auto
Cycle} key before pressing the
{Master Making} key, in order to
disable Auto Cycle mode. See
ZLKS080E
p.18 "When Auto Cycle mode is
off".
ZLKS032E
Adjusting the Print Image Density
1
ZLKS030E
25