FRU Removal and Replacement
4. Place the disk on a static-free surface.
5. Remove and store the ESD wristband.
Installing a disk
Procedure
1. Attach an ESD wristband to your wrist and the enclosure in which you are installing the disk.
2. Align the disk with the guides in the slot.
3. With the disk carrier latch fully open, gently push the disk into the slot.
4. Push on the orange latch tab until the disk is seated in the slot.
5. Push the handle down to engage the latch.
6. Remove and store the ESD wristband.
Installing the front bezel
Procedure
1. Align the bezel with the enclosure.
Dell EMC FS25 SSD Shelf Guide Field Replacement Unit Guide
20
Figure 4 Removing a disk
The latch begins to rotate downward when its tabs meet the enclosure.
Figure 5 Installing a disk
CL4583
CL4720