Default Screen Introduction; Backlight And Screensaver; Overview Of Lcd Menu And Icon; Overview Of Submenu And Icon - Sungrow SG500MX Operation Manual

Operation Manual

6.2.2 Default Screen Introduction

G H
A
C
Accessing to submenus mentioned below starts from the default menu.
LCD screen contains lots of parameters pertinent to the inverter operation. All
parameter configurations must be done by appointed personnel. DO NOT modify any
parameters before you fully understand this manual or consult the staff from Sungrow.

6.2.3 Backlight and Screensaver

If there is no operation to the screen for 5 minutes or more, the backlight will be off. Activate the
backlight by tapping the display and the display will return to the menu operated previously.

6.3 Overview of LCD Menu and Icon

6.3.1 Overview of Submenu and Icon

There are three buttons on the lower left side of the touch panel for user to operate
"Start/Stop"
shown below:
Initialization
Appears every time the inverter is energized. After
initialization, the default screen follows.
B
D
E
F
, "Home", , "Function"
Item Description
Yield data. The first line from the top is
A the present active power; work state is
the transient state of the inverter.
Today's active power curve to indicate
the power percentage (power value
B
divides the inverter nominal power
value).
C DC side voltage and current
AC side line-to-line voltage and phase
D
current
Language selection button. Click to
E change among
French, and Italian.
F Present date and time
Success rate of the inverter internal
G
communication
Success rate
H
between the inverter and PC
. The logical structures of these menus are
6 LCD Menu Operation
English, Chinese,
of communication
19