User Manual
10.3
The Default Screen
The LCD is initialized when the inverter is energized delay 5 seconds and then enters
into the default menu.
If there is no button operation for two minutes, it will go back to default
menu.
Icon
Description
Fan-flt signal
Fan-flt icon
will appear on the lower left corner of the LCD display once a fan-flt
signal is detected. Yet no logs will be recorded and the "fault" indicator won't be lit.
The fan-flt icon
10.4
Adjusting Contrast
P(%)
P-ac
100
80
E-day
60
E-tot
40
20
t
State
0
8
14
20
The default screen displays basic running
information.
"P-ac" means the current output power of the
inverter.
"E-day" means the energy output the current
day.
"E-tot" means the overall accumulative energy
output.
"State" shows the inverter's operation mode.
Current date and time are also displayed.
will disappear after the fan-flt is eliminated.
1. Long press "ESC/ "
adjustment screen.
4.000 kW
15.6 kWh
4976 kWh
Run
2009/11/18 18:35
2. Short press "ESC/▼" to increase the setting
value and short press "ENTER/►" to decrease the
value.
Contrast value ranges from 0 %( min.) to
100 %( max.).
Recommended contrast value is 50%.
10 Operation of LCD Menu
▼ to enter into the contrast
63