Product Description; System Introduction; Product Introduction - Sungrow SH5T User Manual

Product Description

2
2.1

System Introduction

• The inverter must only be operated with PV strings with class II protection in ac-
cordance with IEC 61730, application class A. It is not allowed for the positive
pole or the negative pole of the PV strings to be grounded. This can cause the
inverter to be destroyed.
• Do not connect any local load between the inverter and the AC circuit breaker.
For the TT utility grid, the N line voltage to ground must be 30 V or less.
The inverter applies only to the scenarios described in this manual.
The three-phase hybrid inverters are applicable to both on-grid and off-grid PV systems.
With the integrated Energy Management System (EMS), they can control and optimize the
energy flow so as to increase the self-consumption of the system.
2.2

Product Introduction

Model Description
The model description is as follows (take SH25T as an example):
Appearance
The image shown here is for reference only. The actual product received may differ.
7