Connecting The User System - Renesas Emulation Probe for M32C/87 Group M30870T-EPB User Manual

M30870T-EPB User's Manual 2. Setup

2.9 Connecting the User System

There are eight ways available to connect the emulation probe to user systems as shown in Figure 2.7.
Emulation probe
100-pin
144-pin 0.5-mm-pitch
0.65-mm-pitch 0.5-mm-pitch
M30800T-PTC
(included)
M30800T-PTC
(included)
M3T-100LCC-DMS
(not included)
M3T-100LCC-DMS
(not included)
M30800T-PTC
M3T-FLX100-R
M3T-FLX100-T
(included)
(not included) (not included)
M3T-FLX100-T M3T-FLX100-R
(not included)
(not included)
*1
LCC socket M3T-DIRECT100S M3T-DUMMY100S M3T-FLX-100NRB M3T-F160-100NSD M3T-100LCC-QSD M3T-FLX-100NSD M3T-FLX-144NSD
100-pin LCC 100-pin QFP 100-pin QFP 100-pin QFP 100-pin LQFP 100-pin QFP 100-pin QFP 144-pin LQFP
(included) (not included) (not included) (not included) (not included) (not included) (not included) (not included)
: No. 1 pin
*1: These items are available in one package.
Figure 2.7 Connection of the M30870T-EPB and user system
CAUTION
Note on Connecting the User System:
Take care not to attach the converter board in a wrong direction. It may cause a fatal damage to the emulator
and user system.
REJ10J0482-0300 Rev.3.00 February 16, 2006 Page 29 of 104