Table of Contents
Advertisement
M30870T-EPB User's Manual
3.5 Trace Window
(1) Trace window
1. Trace window
Menu
OptionalWindows
Trace Window
REJ10J0482-0300 Rev.3.00 February 16, 2006
Menu item
Opens the trace window.
Function
Trace window
The trace window is used to show the results of real-time
trace measurements. It has the following four display
modes:
- Bus mode
Bus information per cycle can be inspected. The contents
are displayed in order of execution paths.
- Disassemble + data access mixed mode
The executed instruction and the content of the accessed
data can be inspected together. Contents are displayed in
order of the execution paths.
- Disassemble mode
The execution paths of the executed instructions can be
inspected. The contents are displayed in order of
execution paths.
- Source mode
The execution paths of the source program can be
inspected.
These modes can be switched over using the respective
toolbar buttons.
The trace window shows the measurement result when a
real-time trace measurement has finished. The trace window
remains blank until the real-time trace measurement in
progress finishes.
3. Usage (Emulator Debugger)
Page 71 of 104
Advertisement
Table of Contents
