Table of Contents
Advertisement
M30870T-EPB User's Manual
5. Troubleshooting
This chapter describes how to troubleshoot when this product does not work properly.
5.1 Flowchart to Remedy the Troubles
Figure 5.1 shows the flowchart to remedy the troubles from when power to the emulator is activated until the emulator
debugger starts up. Check this while the user system is disconnected. For the latest FAQs visit the Renesas Tools Homepage.
Turning on emulator
Front panel LED
of emulator
Init dialog box of emulator
debugger displayed
EMEM dialog box of
emulator debugger
Program window of emulator
debugger displayed
Emulator debugger startup completed
Figure 5.1 Flowchart to remedy the troubles
REJ10J0482-0300 Rev.3.00 February 16, 2006
http://www.renesas.com/en/tools
Not normal
Normal
1. Check connection of the power supply cable.
See
2. Check that the power is properly supplied to the user system.
See
Not normal/Error displayed
1. Check the operating environment etc. of the emulator debugger.
Normal
See the user
2. Reinstall the emulator debugger.
Not normal/Error displayed
Normal
"
See
5.2 (2) EMEM Dialog Box Does Not Appear at Debugger Startup
(page 97).
Error displayed
Normal
See
"
2.5 Connecting the Power Supply for the Emulator
"
"
Turning ON the Power
(page 24).
'
s manual of the emulator debugger.
"
5.2 (3) Errors Occur at Debugger Startup
5. Troubleshooting
"
(page 23).
"
"
(page 98).
Page 95 of 104
Advertisement
Table of Contents
