Omron H8PS Operation Manual page 97

■ Operation
<Example>
Setting the upper limit alarm value to "700 r/min" for a 16-output model
Function setting mode
Switching to F3
Selecting the bank
(only when banks are used)
Setting the upper limit speed
* When setting the upper limit speed by holding the [+] or
[−] key to change the displayed speed quickly, the
displayed speed changes more quickly if the other key is
pressed.
End of setting
With the mode switch set to PRGM, hold the
[ADV] key down for at least 3 seconds to enter
the function setting mode.
Press the [ADV] key to move to the "F3 (speed
alarm (upper limit))" menu.
The output allocations are fixed as follows.
8-output model ........Cam 7
16-output model ..... Cam 15
32-output model ..... Cam 31
Select the bank by pressing the [BANK] key.
Complete selecting bank by pressing the
[WRITE] key.
(only for 16-/32-output models and when
banks are used)
Press the [+] or [−] key of the ANGLE keys (*) to
set the upper limit speed.
"hi" starts flashing when setting starts.
Complete setting by pressing the [WRITE] key.
("hi" stops flashing and remains lit.)
4.5 Speed Alarm (F3/F4)
PRG
TST
STEP
CAM
PRG
TST
CAM STEP
PRG
TST
CAM STEP
4-17