Omron H8PS Operation Manual page 22

Section 1 OUTLINE
● All protect function
8 output 16 output 32 output
● Cam protection
function
8 output 16 output 32 output
● Step-number limit
function
8 output 16 output 32 output
1-6
The all protect function disables all the operations (keys and switches)
during Run mode operation. This function prevents operation errors
and protects the H8PS Cam Positioner from unauthorized operation.
Refer to "3.11 All Protection Function".
The cam protection function allows you to set protection for individual
cams so that the programmed values of specific cams are protected
from inadvertent access during operation. This function can also be
used to allow user access to the specified cams only. Effective use of
this function enables the configuration of a safe and user-friendly
human interface.
The H8PS Cam Positioner allows the setting of up to 10 steps (10 sets
of ON/OFF) for each cam (up to 160 steps in total).
The step-number limit function limits the number of usable steps to
prevent an addition of a program by mistake.
Refer to "4.6 Step Number Limit (F5)".
PR GM
TE ST AD V
BA NK
RU N
ON
OFF
CW
AN GL E
1 2
3 4
3 W RI TE
ON 4
ANG
ON DSPL
OFF ON 256
ON 256
OFF 256
OFF 360
ON OR IG IN
360
OFF OFF 360 CL EA R
720
360