Omron H8PS Operation Manual page 20

Section 1 OUTLINE
● Can be used as a
rotation meter
using the rotational
speed display
function
● Can be connected
at a distance of up
to 100 m from the
control target
equipment
● Facility to set the
desired number of
output pulses and
the desired pulse
output starting
angle
1-4
The H8PS Cam Positioner can always display the rotational speed and
present angle on the same display screen. It is also possible to
display the rotational speed in enlarged characters as Main display. In
applications where a rotation meter is independently installed,
installing one H8PS Cam Positioner can satisfy the user's require-
ments.
Present angle
1 2 7
RUN
PV
ST 264
r/ min
1580
CAM STEP
Rotational speed
The encoder cable can be extended to a length of up to 100 m.
Operation is reliable even if the cam positioner is installed at a
distance from the control target equipment (encoder mounting
position).
Encoder cable
You can output the desired number of pulses at the desired timing
during one turn of the encoder. Since a variety of devices can be
connected to the cam positioner and it is easy to set the pulse output
starting angle, it has many applications in addition to displaying
revolution speeds, such as setting the timing of systems.
Refer to "4.4 Pulse Output (F1/F2)".
1 2 7
Switchable
ST PV
1580
CAM STEP
Max. 100 m !
Pulse output
Rotational speed
RUN
r / min
264
Present angle
PLC
Rotation meter