Table of Contents
Advertisement
Section 1 OUTLINE
● Operation Buttons and Keys
11. ADV key
12. Mode switch
13. Programming
mode switch
14. Rotation direction
switch
15. Encoder resolution
switch
No.
1
Displays program details in Run Mode.
2
Selects the cam number with
3
Selects the step number with
4
Selects the bank number.
5
Selects the ON angle, or OFF angle.
6
Writes the set data to memory.
7
Changes the angle or other setting value with
8
USB communications are scheduled to be supported in the near future.
9
Moves to the screen for clearing settings.
10
Designates the current angle of the machine (Encoder) as the origin (0°).
11
Programming or Test Mode: Press to shift to the ADV function setting screen.
Programming Mode:
Run Mode:
12
Switches modes.
Programming Mode (PRGM):
Test Mode (TEST): Used to modify settings while the Encoder is running.
Run Mode (RUN):
13
Select the method used for programming cams.
Teaching: ON/OFF Angles can be set based on actual machine (Encoder) operation.
Manual:
14
Sets the H8PS rotation direction (rotation display monitor, etc.) to the machine (Encoder)
rotation direction.
15
Sets the resolution of the connected Encoder.
Also sets the unit for angle display when using an Encoder with a resolution of 256.
1-14
CAM
STEP
ADV
PRGM
TCH
TEST
RUN
MAN
CW
1
2
3
4
ANG
3
4
PLS/R
DSPL
ON
ON
256
256
ON
256
360
ON
OFF
OFF
360
360
OFF
ON
OFF
OFF
720
360
CCW
DO NOT USE.
Press and hold at least 3 s to shift to the Function Setting
Mode.
Press and hold at least 5 s to enable/disable the All Protec-
tion function.
Used to write cam programs, set the ADV function, etc.
Used for normal operation and to check the cam program.
ANGLE Keys can be used to set ON/OFF angles.
CHECK
1. CHECK key
CAM
2. CAM keys
STEP
3. STEP keys
4. BANK key
BANK
ON
OFF
5. ON/OFF key
ANGLE
WRITE
6. WRITE key
7. ANGLE keys
ORIGIN
CLEAR
8. USB connector
9. CLEAR key
10. ORIGIN key
Description
Keys.
Keys.
Keys.
Hide quick links:
Advertisement
Table of Contents
