Omron H8PS Operation Manual page 34

Section 2 INSTALLATION
Item
Vibration resistance
Shock resistance
Weight
Datasheet Cat. No.
*1: The rush current indicated below will flow when the power is switched on.
Model E6CP-AG5C-C: Approx. 8 A (Time: Approx. 0.3 ms)
Model E6C3-AG5C-C: Approx. 6 A (Time: Approx. 0.8 ms)
Model E6F-AG5C-C:
*2: JEM1030: Applied in 1991
■ Options
Name
Shaft Coupling for the E6CP
Shaft Coupling for the E6C3
Shaft Coupling for the E6F
Extension Cable (*)
Parallel Input Adapter
* Ask your OMRON representative about the availability of non-standard lengths.
2-4
E6CP-AG5C-C
Destruction:
10 to 55 Hz,1.5-mm dou-
ble amplitude for 2 hr each
in X, Y, and Z directions
Destruction: 1,000 m/s
Approx. 200 g
(with 2-m cord)
---
Approx. 9 A (Time: Approx. 5 µs)
Axis: 6 mm dia.
Axis: 8 mm dia.
Axis: 10 mm dia.
5 m
(same for E6CP, E6C3, and E6F)
Two Units can operate in parallel.
E6C3-AG5C-C
Destruction:
10 to 500 Hz, 2-mm double
2
amplitude, 150 m/s 3
times each in X, Y, and Z
directions, 11-min sweep
time
2
3 times each in X, Y, and Z directions
Approx. 300 g
(with 1-m cord)
F058
Specifications
E6F-AG5C-C
Destruction:
10 to 500 Hz,1.5-mm dou-
ble amplitude 3 times each
in X, Y, and Z directions,
11-min sweep time
Approx. 500 g
(with 2-m cord)
E283
Model
E69-C06B
E69-C08B
E69-C10B
E69-DF5
Y92C-30