■ Operation
<Example>
Changing the E24 detection function setting to "no (disabled)"
Function setting mode
Switching to F10
Selection and setting
End of setting
With the mode switch set to PRGM, hold the
[ADV] key down for at least 3 seconds to enter
the function setting mode.
PRGM
TEST
RUN
Press the [ADV] key to move to the "F10 (E24
detection enable/disable)" menu.
Press the [+] or [−] key of the ANGLE keys to
select no (disabled)).
"e24" starts flashing when the setting change
starts.
Complete setting by pressing the [WRITE] key.
("e24" stops flashing and remains lit.)
4.9 E24 Detection Enable/Disable (F10)
CAM
CAM
CAM
PRG
TST
STEP
PRG
TST
STEP
PRG
TST
STEP
4-33