Omron H8PS Operation Manual page 83

Operation
Display
mode
Programming [PRG] lights.
mode
Test mode [TST] lights.
Run mode [RUN] lights.
Function set-
ting mode
Outline
In this mode, programming
and setting, e.g. writing cam
programs and setting ADV
values, are performed.
No outputs will be given in
this mode.
In this mode, programming
and setting, e.g. writing cam
programs and setting ADV
values, are performed while
confirming the outputs. This
mode should also be
selected for making adjust-
ments such as changing the
settings while running the
Cam Positioner.
In this mode, normal opera-
tion is performed.
Programming and setting
operations such as writing
cam programs and setting
ADV values are not possible.
In this mode, the convenient
functions and advanced
functions are set.
4.1 Mode Transitions
Main functions
• Writing cam programs
(manual/teach)
• Clearing cam programs
• All clear
• Setting the origin
• Setting the ADV value
• Switching to the function
setting mode
• Writing cam programs
(manual/teach)
• Clearing cam programs
• All clear
• Setting the origin
• Setting the ADV value
• Checking cam programs
• Switching the display
between Speed and
Angle
• All protection
• F1 Number of pulse out-
puts
• F2 Pulse output start
angle
• F3 Speed alarm
(upper limit)
• F4 Speed alarm
(lower limit)
• F5 Step number limit
• F6 Cam protection
• F7 Bank enable/disable
• F8 Bank switching
method
• F9 Bank copy
• F10 E24 detection
enable/disable
4-3