Connecting Switches To The Stack's Backplane; Stacking Module And Interconnect Cables - Enterasys VH-2402S User Manual

Connecting Switches to the Stack's Backplane

The optional Stacking Module ships with one 32 cm stacking cable. The
32 cm stacking cable can also be ordered separately, if required.
Figure 2-2 shows how the stack cables are cascaded between switches
in a stack (rack). To connect up to seven switches to the backplane, plug
one end of the stack cable in the "DOWN" port of the top switch and the
other end to the "UP" port of the next switch. Repeat this step for each
switch in the stack (or rack). Form a simple chain starting at the DOWN
port on the first switch and ending at the UP port on the last switch.
Figure 2-2. Connecting Switches to the Stack's Backplane

Stacking Module and Interconnect Cables

Table 2-1 provides information for the Stacking Module and interconnect
cables available for the VH-2402S.
Table 2-1. Stacking Module and Interconnect Cables
Part Number
VH-STACK
9380142
20 Installation
Functions Description
Stack inter- Stacking Module used to connect switches in a
connection stack.
Unit ships with one 32 cm stack interconnect cable
(9380142).
Stack inter- 32 cm stack interconnect cable.
connection
VH-2402S