Table of Contents
Advertisement
LCD Panel
Network
Support
Camera IP Address &
Port
Dual Gigabit LAN
Utility Software
Security
Operation System
On-line Users List
Host Access Control
User Management
Alert Notification
UPS
Event Logs
Client PC Requirement
CPU
Online RAID Level Migration
HDD S.M.A.R.T.
Bad blocks scan
Support PC-less RAID setup via LCD panel for the first time
installation
Services: Web File Manager, FTP, SMB/CIFS
PC-less RAID configuration for the first time setup
When the system is ready, users can check or configure the
IP settings, physical disk info, volume info, system info, shut
down or reboot the NVR etc.
HTTP, TCP/IP, SMTP, DHCP, Static IP, DNS, DDNS, FTP, NTP, UPnP,
Failover, Load-balancing, Multi-IP setting
Allow setting LAN/WAN IP address of each camera
Failover: In case one of the LAN network fails, the packets
sent to the NVR will be handled by the other LAN interface
Load-balancing: Link aggregation is supported to increase
the transfer speed
Multi-IP setting: The NVR can serve different network
groups in two different subnets
QNAP Finder: Discovery and quick setup for NVR
Linux-embedded, free from PC crash and virus attack
Record of the users currently logged on and previously logged on
to the NVR
Specify the connections to be allowed and denied to access NVR
The right to monitor and playback each camera can be separately
defined for each user (up to 32 users)
E-mail, buzzer, event logs
Support APC / MGE (USB type of UPS)
Detailed event logs of system warning, hard disk error, network
disconnection, UPS status, and users' networking services, and
data access
Motion JPEG format (up to 20 channels): Pentium 4 CPU 2.8
GHz or above
99
Advertisement
Table of Contents
