3.2.2 Camera Status; 3.2.3 Connection Message - QNAP VioStor-5000 Series User Manual

3.2.2 Camera Status

The camera status is indicated by the icons shown below:
Icon Camera Status
Scheduled or continuous recording is in process
This camera supports audio function
This camera supports PT function
Manual recording is enabled
The alarm input 1 of the camera is triggered and recording is in process
The alarm input 2 of the camera is triggered and recording is in process
The alarm input 3 of the camera is triggered and recording is in process
Motion detection recording is in process
Digital zoom is enabled

3.2.3 Connection Message

When the VioStor fails to display a camera, a message will be shown within the live video
window. The following messages may be shown:
Connecting

If the network camera is located in remote network or Internet, it may take some time
to establish connection to the camera.
Disconnected

The system cannot connect to the network camera. Please check the network
connection of your computer and the availability of the network camera. If the
camera is installed on the Internet, the port for the camera must be opened on your
router or gateway.
No Permission

This message is shown when a user without access right to view this camera. Please
logout the system and login as a user with the access right to the camera.
Server Error

Please check the camera settings or update camera's firmware to newer version.
Contact the technical support if the problem is not fixed after checking.
25