QNAP VioStor-5000 Series User Manual page 118

Environment 4: The VioStor and the IP camera are installed behind the router
VioStor 1
VioStor 2
VioStor 3
Router public IP
In the example, to allow a PC which is located remotely to access each VioStor via FTP, you
need to:
Step 1. Set up port mapping (virtual server) on the router
VioStor 1
VioStor 2
VioStor 3
You could directly connect VioStor 1 via FTP by ftp://219.87.145.205:2001
You could directly connect VioStor 2 via FTP by ftp://219.87.145.205:2002
You could directly connect VioStor 3 via FTP by ftp://219.87.145.205:2003
Step 2. Enable FTP Port Mapping on the VioStor
If you want to connect each VioStor via FTP by clicking "FTP" in playback page of each
VioStor, you need to enable FTP port mapping in "Network Settings" > "File Services" on the
system administration page and set the mapped port number.
VioStor 1
VioStor 2
VioStor 3
After finishing the above two steps, you can access the VioStor via FTP by entering the IP
address in the IE browser or clicking "FTP" in the playback page. Then login the VioStor
via the correct user name and password.
IP Address
192.168.1.101
192.168.1.102
192.168.1.103
219.87.145.205
From
219.87.145.205:2001
219.87.145.205:2002
219.87.145.205:2003
Mapped Port
2001
2002
2003
118
Forward to
192.168.1.101:21
192.168.1.102:21
192.168.1.103:21