Table of Contents
Advertisement
5.3
Network Settings
You can configure the WAN and LAN settings, DDNS service, file service, host access control,
protocol management and view the network settings in this section.
5.3.1
TCP/IP Configuration
The VioStor provides two ports that you can configure failover, load balancing, or
standalone functions. When you use these functions, make sure both LAN ports are
connected to the network.
Configuration of Network Interfaces
Failover (Default)
Failover refers to the capability of switching over the network transfer port to the
redundant port automatically when the primary one fails due to hardware or
connection error to avoid network disconnection. When the primary network port
resumes to work, the network transfer will be switched back to that port automatically.
44
Advertisement
Table of Contents
