Table of Contents
Advertisement
6.2
Power Outage or Abnormal Shutdown
In case of power outage or improper shutdown of the server, the server will resume to the
state before it is shut down. If your server does not function properly after restart, please
do the following:
1.
If the system configuration is lost, configure the system again.
2.
In the event of abnormal operation of the server, contact customer service for
technical support.
To avoid the above situations, please back up your data periodically and make sure you
have done the following:
Follow the instructions described in
If there is an anticipated power outage, back up all important data and turn off the
server properly until power supply is resumed.
6.3
Disk Hot Swapping (RAID Configuration)
The VioStor supports hot swapping. When a hard disk of RAID disk volume fails, the failed
disk can be replaced by a new one immediately without shutting down the system, and the
recording data can be reserved. However, if the hard disks are working properly and
recording is in process, do not hot swap the disks to avoid damage to the disks or recording
files.
Chapter 5.7.2
to restart or shut down the server.
85
Advertisement
Table of Contents
