QNAP VioStor-5000 Series User Manual page 47

Network Transfer Rate

You can select auto-negotiation (default), 1000 Mbps, or 100 Mbps. It is
recommended to use the default setting that the server will determine network speed
automatically.
Obtain IP address settings automatically via DHCP

If your network supports DHCP, VioStor will use DHCP protocol to retrieve the IP
address and related information automatically.
Use static IP address

To use fixed IP address for network connection, enter fixed IP address, subnet mask,
and default gateway.
Primary DNS Server

Enter the IP address of primary DNS server that provides DNS service for VioStor in
external network.
Secondary DNS Server

Enter the IP address of secondary DNS server that provides DNS service for VioStor in
external network.
Enable DHCP Server
If no DHCP is available in the LAN where the VioStor locates, you can enable this function
47