Table of Contents
Advertisement
To use this function, please follow the steps below:
1.
Set the number of days that the latest recordings should be backed up. If 3 days
are entered, the recordings of today, yesterday and the day before yesterday will
be backed up.
2.
Connect a USB storage device, e.g. USB disk drive to the front USB port of
VioStor.
3.
Press the Backup button on VioStor. The recording data on VioStor will start to
be copied to the USB device instantly. If the USB device is recognized, the USB
LED glows in blue. The USB LED will blink in blue when the data is being copied.
The LED will become blue again when data copy is finished. You can then safely
remove the device.
USB 2.0
Note: Video backup function supports only USB device of 10GB storage capacity
or above.
Enable light signal alert when the free size of SATA disk is less than the value
The Status LED flashes red and green when this function is enabled and the free space
of the SATA disk is less than the value. The range of the value is 1-51200 MB.
Enable alarm buzzer
Enable this option. The system will sound when an error occurs.
Smart Fan configuration
After enabling the smart fan, the fan rotation speed is automatically adjusted
according to the server temperature. It is recommended to enable this option. By
manually setting the fan rotation speed, the fan rotates at the defined speed
continuously.
Backup Button (One Touch
Auto Video Backup)
72
Advertisement
Table of Contents
