Enphase Microinverter Installation
Installing the Enphase IQ 6 and IQ 6+ Micros involves several key steps. Each step listed here is detailed
in the following pages.
Step 1: Position the Enphase Q Cable
Step 2: Position the Q Aggregator or Junction Box
Step 3: Mount the Microinverters
Step 4: Create an Installation Map
Step 5: Manage the Cabling
Step 6: Connect the Microinverters
Step 7: Terminate the Unused End of the Cable
Step 8: Complete Installation of Junction Box or an Enphase Q Aggregator
Step 9: Connect the PV Modules
Step 10: Energize the System
Enphase Q
Aggregator
14
Tie wraps
or cable
clips
Enphase
IQ 6 or IQ 6+
Micros
© 2017 Enphase Energy Inc. All rights reserved.
IQ 6 / IQ 6+ Micro Installation and Operation
AC
connector
DC
connectors
Terminator
Enphase Q
Cable
141-00034-01