enphase IQ6-60-2-US Installation And Operation Manual page 37

Hide thumbs Also See for IQ6-60-2-US:
Table of Contents

Advertisement

Standard warranty term
Compliance
Grounding
Monitoring
Communication
Integrated DC disconnect
Integrated AC disconnect
37
Enphase IQ6-60-2 Microinverter Parameters
enphase.com/warranty
The DC circuit meets the requirements for ungrounded
PV arrays in NEC. Ground fault protection (GFP) is
integrated into the class II double insulated
microinverter.
Enlighten Manager and MyEnlighten monitoring options
require an Enphase IQ Envoy
Power line
The DC connector has been evaluated and approved
for use as the load-break disconnect required by NEC
690.
The AC connector has been evaluated and approved for
use as the load-break disconnect required by NEC 690.
© 2017 Enphase Energy Inc. All rights reserved.
IQ 6 / IQ 6+ Micro Installation and Operation
UL1741/IEEE1547, FCC Part 15 Class B, ICES-0003
Class B, CAN/CSA-C22.2 NO. 107.1-01
This product is UL Listed as PV Rapid Shut Down
Equipment and conforms with NEC-2014 and NEC-
2017 section 690.12 and C22.1-2015 Rule 64-218
Rapid Shutdown of PV Systems, for AC and DC
conductors, when installed according manufacturer's
instructions.
141-00034-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

Iq6plus-72-2-usIq 6 micros

Table of Contents