Shuttle Recovery Owner's Manual page 21

Step 11: Inspect the assembly
1. Roll the carriage back and forth several times. The carriage should roll smoothly and
quietly and should end in a soft stop at either end of the stroke.
2. Attach an Elasticord by pulling the lanyard toward the head-end of the rail assembly and
lift up to attach the Elasticord to the carriage. There should be a soft stop at each end of
the stroke. If a hard stop should occur, it is possible that the ROM ropes are crossed,
eliminating the donut ring's softening effect. Also, try adjusting the ROM strap at the
head-end of the machine to modify the resting position of the carriage.
3. When the Shuttle is in use the machine should be nearly silent, if the user experiences
anything but a smooth, quiet glide, please contact our technicians
4. When you are satisfied with the assembly of your Shuttle, add black plastic nut covers
as trim to the exposed nuts on the outside of the machine.
Page 21 of 73