Page 1
Assembly Guide for the If you discover damaged or missing parts, please contact Shuttle Systems support@shuttlesystems.com | 1-800-334-5633 9am-5pm Pacific Time Page 1...
Page 2
PDF versions of these instructions are available at: http://shuttlesystems.com/pages/faq Keep in mind that the following images pertain to just one of the four available Shuttle Balance models, your parts may appear slightly different than those in the included images but, the required steps remain the same.
Page 3
STEP 1 ASSEMBLING THE HANDRAIL TUBES TO THE BOTTOM FRAME TUBES ITEMS 1. Remove all protective packaging from the Handrail Tubes. REQUIRED 2. Connect both Handrail Tubes to one side of the Bottom Frame Tubes, aligning the holes. Lift both Handrail Tubes and attach the last remaining Bottom Frame piece. (Pic 1.1 & 1.2) HANDRAILS TUBES BOTTOM...
Page 4
STEP 2 ATTACHING THE WOBBLE BOARD ITEMS 1. Place the Wobble Board in the middle of the Frame. Remove the zip-tie and parts bag with REQUIRED four knurled knobs and four steel/rubber washers from the Wobble Board. (Pic 2.1) 2. Detach four chain carabiners (two on each side) from the eyebolts on the Wobble Board WOBBLE and attach them to the eyebolts on the Handrails.
Page 6
1. Align the velcro on the bottom frame with the velcro on the bottom of the steps. Press the REQUIRED step down to secure to the frame. The Shuttle Logo should be facing out from the Wobble Board. (Pic 3.1) STEPS 3.1...
Page 7
Finally, you have one of the greatest machines on earth..Well, at least we'd like to think so - and many of our owners agree. Therefore, enjoy it! Leave us a review on our website! Please visit us at: www.ShuttleSystems.com 1-800-334-5633 Made in the Page 7...
Page 8
I 5 YEAR LIMITED ORIGINAL EQUIPMENT WARRANTY REPLACEMENT PARTS SHUTTLE S STEMS . T , 18003345633. P : M , , , . ...
Need help?
Do you have a question about the BALANCE and is the answer not in the manual?
Questions and answers