The Phone Bar; Headset; Connect The Headset; Answer Or Reject A Call With The Headset - ASCOM Myco 2 User Manual

Hide thumbs Also See for Myco 2:
Table of Contents

Advertisement

User Manual
Ascom Myco Smartphone

5.4.11 The Phone Bar

Call status is shown through a phone bar in the lower part of the screen while navigating the
user interface.
Tap the icons on the phone bar to interact directly with the call (for example to accept/end
the call, or to push-to-talk).
Tap the middle of the phone bar to open the call screen.
Figure 34. Phone bar showing an incoming call.
1

5.5 Headset

A headset can be used for any type of call on the Ascom Myco 2 handset. The original Ascom
Myco Headset or any Android compatible 3.5 mm headset can be used
NOTE: The headset connector for an iPhone looks the same as the headset
connector for Android, but the electrical internals in the headset, specifically
for the microphone, differ from an Android compatible headset. An iPhone
headset can therefore not be used with the Ascom Myco.
5.5.1

Connect the Headset

In order to connect the headset to the handset, do the following:
Connect the Ascom headset adapter to the charging-/headset connector.
Connect the headset to the adapter.
5.5.2

Answer or Reject a Call with the Headset

To answer a call with the headset, short-press the main headset button. To reject a call, long-
press the main headset button. To answer a call without using the headset, refer to
or Reject a Call
5.5.3

Headset Functions During a Call

A short press on the main headset button, while in a call, will hang up the call. A long press on
the main headset button will mute the mic (a long press on the main headset button, with the
screen on and outside of a call, will start voice control of the handset).
5.5.4

Make a Call with the Headset

To initiate a call, follow the instructions in
cannot be used to initiate a call.
5.5.5

Adjust the Volume with the Headset

To adjust the volume with the headset, press the volume button up or down on the headset. To
adjust the volume without using the headset buttons, refer to
15.
1.Only available for Ascom Myco 2.
2.Requires the use of the Ascom headset adapter (item number 660511).
14 May 2018 / Ver. K
5. Calling
on page 35.
5.2 Make a Call
on page 36. The headset itself
4.3 Adjust the Volume
TD 93066EN
2
.
5.1 Answer
on page
44

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Myco 2 and is the answer not in the manual?

Questions and answers

Table of Contents