Table of Contents
Advertisement
User Manual
Ascom Myco Smartphone
3 When the handset displays "Enter messaging number", enter the number.
CAUTION:
4 Tap Done.
5 If the Unite system is configured for user login, enter the user ID and password supplied by
the system administrator.
2.2.2
Install Using QR Codes and NFC
Quick installation and setup can be done by scanning a QR code, if Easy Deployment is
unavailable. The Setup QR code is created by a system administrator and contains the
parameters necessary to install the handset in the system. Refer to the Configuration Manual,
Ascom Myco Smartphone for instructions on how to create Setup QR codes.
NFC can be used to share scanned deployment data with other Ascom Myco 2 GMS handsets.
In this way it is possible to avoid using the Android Setup Wizard for initial setup of the GMS for
each handset. Note that a Google Play account, if wanted, needs to be added manually.
Scan a Setup QR Code with an Ascom Myco Handset
1
On the App view, tap Setup
2 Turn the handset horizontally and position the handset so that the QR code fits within the
scanning window.
Figure 2. Scanning of QR code.
3 If the scan is successful the Setup app closes automatically and the text "Deployment data
applied successfully" appears on screen.
Scan a Setup QR Code with an Ascom Myco 2 Handset
1
On the App view, tap Setup
2 Turn the handset horizontally and position the handset so that the QR code fits within the
scanning window.
3 Choose between tapping on:
•
Use for this device to use the scanned deployment data to set up the handset. If the
deployment is successful the Setup app closes automatically and the text "Deployment
successful" appears on screen.
•
Share code to share the scanned deployment data with other handsets by using NFC.
Instructions for sharing code appear on the screen, see
successful on the handset getting the shared deployment data, the text "Deployment
successful" appears on the screen of that handset.
14 May 2018 / Ver. K
2. Quick Installation Steps for Administrators
If a wrong number is entered, a factory reset must be done, and all
handset configuration parameter settings are restored to the default
values. Refer to the Configuration Manual, Ascom Myco Smartphone.
.
.
TD 93066EN
Figure
3. If the deployment is
8
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Myco 2 and is the answer not in the manual?
Questions and answers