The Phone Bar; Headset; Connect The Headset; Answer Or Reject A Call With The Headset - ASCOM Myco User Manual

User Manual
Ascom Myco Wi-Fi and Cellular Smartphone
3 To return to the Phone app tap the phone bar, or swipe down the notification drawer
and tap on the ongoing call. If the phone bar is hidden, press the Home button to
return to the Alert view.
TIP: Tap

5.4.11 The Phone Bar

Call status is shown through a phone bar in the lower part of the screen while navigating the
user interface.
• Tap the icons on the phone bar to interact directly with the call (for example to accept/
end the call, or to push-to-talk).
• Tap the middle of the phone bar to open the call screen.
Figure 17. Phone bar showing an incoming call.
1
5.5

Headset

A headset can be used for any type of call on the Ascom Myco 2 handset. The original Ascom
Myco Headset or any Android compatible 3.5 mm headset can be used
5.5.1

Connect the Headset

In order to connect the headset to the handset, do the following:
• Connect the Ascom headset adapter to the charging-/headset connector
• Connect the headset to the adapter
5.5.2

Answer or reject a Call with the Headset

To answer a call with the headset, short-press the main headset button. To reject a call,
long-press the main headset button. To answer a call without using the headset, refer to
Answer or Reject a Call
5.5.3

Headset functions during a call

A short press on the main headset button, while in a call, will hang up the call. A long press
on the main headset button will mute the mic (a long press on the main headset button,
with the screen on and outside of a call, will start voice control of the handset).
5.5.4

Make a Call with the Headset

To initiate a call, follow the instructions in
cannot be used to initiate a call.
1.Only available for Ascom Myco 2.
2.Requires the use of the Ascom headset adapter (item number 660511).
3 October 2017 / Ver. H
5. Calling
to disconnect the call.
on page 31.
5.2 Make a Call
TD 93066EN
2
.
on page 32. The headset itself
5.1
40