Regulatory Information (Eu And Efta); Exposure To Radio Frequency Signals; Regulatory Compliance Statements (Usa And Canada Only); Fcc And Ised Compliance Statements - ASCOM Myco 2 User Manual

User Manual
Ascom Myco Smartphone
A.2

Regulatory Information (EU and EFTA)

A.2.1 Exposure to Radio Frequency Signals
SH1-ACAA
SH1-ACBA +
SH1-ACBB
SH1-ABAA
SH1-ABBA +
SH1-ABBB
THIS MOBILE DEVICE MEETS GUIDELINES FOR EXPOSURE TO RADIO WAVES. Your mobile
device is a radio transmitter and receiver. It's designed not to exceed the limits for exposure to
radio waves recommended by international guidelines. These guidelines were developed by
the independent scientific organization ICNIRP and include safety margins designed to assure
the protection of all persons, regardless of age and health.
The exposure guidelines for mobile devices employ a unit of measurement known as the
Specific Absorption Rate, or SAR. The SAR limit stated in the ICNIRP guidelines is 2.0 W/kg
averaged over 10 grams of tissue. Tests for SAR are conducted using standard operating
positions with the device transmitting at its highest certified power level in all tested frequency
bands. The actual SAR level of an operating device can be below the maximum value because
the device is designed to use only the power required to reach the network. That amount
changes depending on a number of factors such as how close you are to a network base
station. The highest SAR value under the ICNIRP guidelines for use of the device at the ear is
0.201 W/kg and at the body is 0.278 W/kg (The measure distance of 1.5 cm). Use of device
accessories and enhancements may result in different SAR values. SAR values may vary
depending on national reporting and testing requirements and the network band.
A.3

Regulatory Compliance Statements (USA and Canada Only)

FCC ID: BXZSH1B & BXZSH1B2
SH1-ABAA: BXZSH1B
SH1-ABBA & SH1-ABBB: BXZSH1B2
SH1-ACAA: BXZSH1C
ISED: 3724B-SH1B & 3724B-SH1B2
SH1-ABAA: 3724B-SH1B
SH1-ABBA & SH1-ABBB: 3724B-SH1B2
SH1-ACAA: 3724B-SH1C
A.3.1 FCC and ISED Compliance Statements
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient, or relocate the receiving antennas.
• Increase the separation between the equipment and receiver.
14 May 2018 / Ver. K
Appendix A. Safety Precautions
Close to ear
0.468 W/kg (10 g)
0.467 W/kg
0.117 W/kg (10 g)
0.121 W/kg
Handheld/body mounted
0.848 W/kg (10 g)
1.040 W/kg
0.144 W/kg (10 g)
0.194 W/kg
TD 93066EN
102