Install Using Qr Codes And Nfc - ASCOM Myco User Manual

Quick Installation Steps for Administrators
2.2.2

Install Using QR Codes and NFC

Quick installation and setup can be done by scanning a QR code, if Easy Deployment is unavailable. The
Setup QR code is created by a system administrator and contains the parameters necessary to install the
handset in the system. See the Configuration Manual, Ascom Myco Smartphone for instructions on how to
create Setup QR codes.
NFC can be used to share scanned deployment data with other Ascom Myco 2 GMS handsets. In this way it
is possible to avoid using the Android Setup Wizard for initial setup of the GMS for each handset. Note that
a Google Play account, if wanted, needs to be added manually.
Scan a Setup QR Code with an Ascom Myco Handset
1. On the App view, tap the Setup
2. Turn the handset horizontally and position the handset so that the QR code fits within the scanning
window.
Figure 2. Scanning of QR code
3. If the scan is successful the Setup app closes automatically and the text "Deployment data applied
successfully" appears on screen.
Scan a Setup QR Code with an Ascom Myco 2 Handset
1. On the App view, tap the Setup
2. Turn the handset horizontally and position the handset so that the QR code fits within the scanning
window.
3. Choose between tapping on:
− Use for this device to use the scanned deployment data to set up the handset. If the deployment is
successful the Setup app closes automatically and the text "Deployment successful" appears on
screen.
− Share code to share the scanned deployment data with other handsets by using NFC. Instructions
for sharing code appear on the screen, see
page 7. If the deployment is successful on the handset getting the shared deployment data, the text
"Deployment successful" appears on the screen of that handset.
6
icon.
icon.
Figure 3. Instructions for sharing code by using NFC,
Ascom Myco Smartphone
TD 93066EN / 14 December 2018 / Ver. N
User Manual