Connecting The Duofern Motion Detector 9484; Safety Instructions For The Electrical Connection - RADEMACHER DuoFern 9484 Instruction Manual

i

9. Connecting the DuoFern Motion Detector 9484

Prior to the electrical connection, check that the voltage / frequen-
cy on the type plate corresponds to that of the local mains supply.
i

9.1 Safety Instructions for the Electrical Connection

There is a risk of fatal electric shocks when touching
electrical components.
◆ All connection and installation work must only be carried
out in a de-energised state.
◆ Disconnect all phases of the mains power supply cable and
secure it to prevent any reconnection.
◆ Check that the system is de-energised.
Short-circuiting, caused when the DuoFern Motion Detector
9484 is overloaded, poses a danger to life.
◆ The maximum switching capacity must not be exceeded, for
this, please observe the details in the "Technical Specifications",
see page 24.
Read the specifications relating to the electrical
connection detailed in the instruction manual of the
electrical appliance used.
DANGER!
WARNING!
EN
37