Logging Off Duofern Devices - RADEMACHER DuoFern 9484 Instruction Manual

i

17.2 Logging off DuoFern Devices

1.
Switch the desired DuoFern device to the log-off mode
(please refer to the relevant instruction manual).
2.
+
120 sec.
3.
4.
5.
Log off the next DuoFern device.
For this, repeat points 1 to 2 or terminate the log-off.
Pay attention to the middle indicator light
The middle indicator light lights up red if the registration process
fails, for example if:
◆ An attempt was made to log-off a DuoFern device that is
not logged-on.
54
1 sec.
MANU
Enable the log-off mode of the DuoFern
Motion Detector 9484.
Simultaneously press and hold the
buttons for 1 second.
The log-off mode remains active for
approx.120 seconds.
During the logging off process,
the middle indicator light flashes red.
After successful logging off, the middle
indicator light lights up for approx. 4
seconds and the connected appliance is
briefly switched on or off.
EN