13. Manual Operation
Manual operation of the DuoFern Motion Detector 9484 can be
carried out with the on/off button or via a push button or switch
connected to the control input [Ext. ].
Switching the appliance on/off
1.
or
2.
At the same time, the enabled operating mode is displayed by
means of the indicator lights, see page 44.
3.
In the automatic mode
matically switched off after the set run-on time, see page 51.
i
or
3.
No run-on time is enabled in manual mode
the appliance must be switched off manually.
1 x
The connected appliance is switched on or
off by briefly tapping the on/off button
and/or by pressing the external push
button or switch.
The appliance can also be switched off manually;
this stops the run-on time.
◆ Subsequently, the DuoFern Motion Detector
9484 is locked for approx. five seconds to prevent
unintentional restarting.
, the appliance is auto-
EN
;
45