Final Installation Of The Duofern Window/Door Contact - RADEMACHER DuoFern Installation And Commissioning Manual
Window/door contact
Source: rademacher.de
Hide thumbs
Also See for DuoFern:
- Instruction manual (120 pages) ,
- Installation and operating instrictions (48 pages) ,
- Instruction manual for the electrical connection and for commissioning (48 pages)
Table of Contents
Advertisement
9.6 Final installation of the
i
DuoFern Window/Door Contact
1.
Mark the installation positions of the sensor part and mag-
net, e.g. with a pencil.
2.
Detach the fixed sensor part and magnet.
3.
Remove the round adhesive pads and clean the adhesive
points thoroughly with the cleaning cloth provided.
4.
Apply the double-sided adhesive strips.
5.
Re-affix the sensor part and magnet precisely to the previ-
ously marked points with light pressure.
i
Repeat the teach-in process if necessary (see
page 19), if the respective states are no longer
detected properly after the final installation.
EN
21
Advertisement
Table of Contents
