i
4. General View of the Operating Unit
Pos. Symbol
1)
2)
Press for
4 seconds
3)
Press for
4 seconds
4)
Press for
4 seconds
*
The values are respectively set in combination with the other setting
buttons, see table on page 14.
10
1)
2)
3)
Description
Sensor panel with motion sensor, indicator lights
and lens.
Automatic button [A]
AUTO
◆ Enable automatic mode
◆ Test and set the sensitivity level. *
On / Off button
◆ Switch the connected appliance on / off;
◆ Test and set the brightness value. *
Manual button [M]
MANU
◆ Enable manual mode
◆ Test and set the run-on time. *
(activate motion sensor).
see page 45.
(deactivate motion sensor).
EN
4)