Setting The Brightness Set Limit - RADEMACHER DuoFern 9484 Instruction Manual

i

15. Setting the Brightness Set Limit

With the brightness set limit, you can determine with which
level of brightness the motion detector is enabled.
There are five different settings.
Observe the following whilst setting the indicator lights:
Display the set brightness set limit
1.
4 sec.
2.
= 5 lux (low level of brightness)
= 10 lux
= 50 lux
= 200 lux
= 700 lux (high level of brightness) *
= Brightness sensor disabled
* Factory setting
Press and hold the button for
approx. 4 seconds.
The brightness set limit is displayed after
approx. 4 seconds (example).
EN
47